- 德國Lampert
- BND自研
- 德國FEMTO放大器
- 德國GTE
- Pacific Lasertec...
- 數據采集AA LAB SYSTE...
- 流量測量AA LAB SYSTE...
- 光纖鏈路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博納德試驗指針銷
- 插頭插座類檢測設備
- 燈頭燈座類檢測設備
- 標準地板防滑系列
- 進口手持型測力計
- 意大利Gabbrielli
- 英國MUNRO風速風向表
- 美國DL放大器
- 陶瓷扭轉粘度計
- 高壓電源放大器
- DEI脈沖發生器
- 瑞士Zurich Instrum...
- 冷凍負載試驗包
- 博納德試驗機設備
- 體育檢測儀器
- 美國ED&D試驗指
- 德國PTL試驗機設備
- 德國PTL試驗指針銷
- 光纖光譜儀
- 微型稱重傳感器
- 光學斬波器
- 高集數據采集卡
- 美國SRS放大器
- 德國WAZAU系列
- MONROE靜電測試儀
- 其他
PS-15-25-L
?輸入電壓100-240VAC
?輸出±15V ,+400/-250mA
?Lemo ® 插頭,屏蔽輸出線
?避免接地回路的非固定式設計
?短路被保護
?適用于所有FEMTO模塊
Features
Linear Regulated Stabilization ± 15 VDC
Low Ripple and Noise
Wide Input Range Switched Power Supply
Safety Instructions
This power supply is exclusively designed for use with FEMTO amplifier modules. Before use,
take care to follow general electrical safety rules and notice the information shown in this
datasheet and at the type label on the power supply. Do not use visibly damaged power
supplies. Do not use this power supply in security relevant applications or in chemical
aggressive environment. Do not expose this power supply to unusual mechanical stress or
vibrations. During use do not expose the unit to direct sunlight and do not cover it because
cooling is made by convection. Respect the general rules for fire prevention. Use in original
condition only, do not open, do not repair the unit. When operation is no longer possible or
considered to be unsafe, the power supply must be taken out of service and be secured
against unintended operation.
Environmental Protection
FEMTO offers all end users in the EC the possibility to return “end of life” units without
incurring disposal charges. If you wish to return a unit for waste recovery, please contact
FEMTO for further information. Do not dispose of the unit in a litter bin or at a public waste
disposal site.
Specifications Test Conditions Ta = 25°C
Input Input Voltage 100...240 VAC, ± 10%, 47…63 Hz
Power Consumption, no load 2.3 W typ.
Power Consumption, max. load 20 W max
Inrush current max. 15 A @115VAC max. 30 A @230 VAC.
Output Output Voltage ± 15 VDC, ± 5%
+ 5 VDC (not connected to the output connector)
Output Current + 500 mA / - 300 mA max.
Ripple and Noise 20 mVpp typ. (@ ± 150 mA load)
Protections Insulation Voltage, prim./sec. 4242 VDC
Insulation Resistance, prim./sec. 10 GΩ min. (@ 500 VDC)
Temperature Protection installed
Overload Protection short-circuit-proof
No Load Protection idle-running-proof






