德國FEMTO低噪聲電纜CAB-LN1進口電流放大器

*大限度地減少摩擦和震顫噪聲

專為超敏感電流和電荷測量而設(shè)計的

噪音水平減少1000倍

高屏蔽同軸設(shè)計

與上等連接器充分組裝

超高絕緣電阻>1014Ω - 保證

可用長度：0.1米，0.2M，0.5米和1米

自定義長度可供選擇：10條*小起訂量

MICROPHONIC NOISE

Mechanical influences on a cable (vibration, sound waves, friction, bending etc.) can induce electrical charges by triboelectric effects leading to significant extra noise typically in the low frequency range from quasi-DC up to 100 kHz. When measuring very low currents in the nano-, pico- and femtoampere region this microphonic noise may become the dominating noise source.
Even when located in a relatively quiet and silent environment any micro-movement of the cable can produce significant noise levels making a real low noise signal measurement impossible.

NOISE REDUCTION BY A FACTOR OF 1,000

FEMTO′s low noise cables are manufactured with a special semi-conductive layer between the dielectric and shield to counteract effectively the microphonic noise. The careful test and evaluation process we have performed in our femtoampere-laboratory showed our CAB-LN1 cable being the best-in-class cable also in comparison to many low noise cables available in the market. Due to the superior cable design the noise reduction compared to ordinary e.g. RG58 or RG174 cable is typically more than 1,000 times.

INSULATION RESISTANCE > 10¹⁴ Ω – 100% TESTED FOR EACH CABLE

Performing low current or low charge measurements requires signal cables with very high insulation resistance in order to avoid additional thermal resistance noise. A high insulation resistance is also important for preventing the low currents/charges from flowing to ground (shield) and therefore not contributing to the signal measurement. The cable used in the CAB-LN1 series is a very high insulation type. In addition all FEMTO low noise cables are equipped with ultra-high insulation connectors preserving the high insulation resistance also for the completely assembled cable. Before shipping each cable is thoroughly tested to meet the insulation resistance specification of > 10¹⁴ Ω.

APPLICATIONS

§  Measurements of low currents down to femto amperes

§  Photodetectors and ionization detectors

§  High resistance measurements

§  Scanning probe microscopy (STM, SPM, STS)

§  Spectroscopy

§  Piezo- and pyroelectric transducers

產(chǎn)品型號列表