產品目錄
- 德國Lampert
- BND自研
- 德國FEMTO放大器
- 德國GTE
- Pacific Lasertec...
- 數據采集AA LAB SYSTE...
- 流量測量AA LAB SYSTE...
- 光纖鏈路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博納德試驗指針銷
- 插頭插座類檢測設備
- 燈頭燈座類檢測設備
- 標準地板防滑系列
- 進口手持型測力計
- 意大利Gabbrielli
- 英國MUNRO風速風向表
- 美國DL放大器
- 陶瓷扭轉粘度計
- 高壓電源放大器
- DEI脈沖發生器
- 瑞士Zurich Instrum...
- 冷凍負載試驗包
- 博納德試驗機設備
- 體育檢測儀器
- 美國ED&D試驗指
- 德國PTL試驗機設備
- 德國PTL試驗指針銷
- 光纖光譜儀
- 微型稱重傳感器
- 光學斬波器
- 高集數據采集卡
- 美國SRS放大器
- 德國WAZAU系列
- MONROE靜電測試儀
- 其他
產品詳情
簡單介紹:
PTL轉盤防水測試儀是德國PTL產品中用于轉動樣本來確定防水的防水測試儀;
PTL轉盤防水測試儀符合IEC 60335-1 / 1991-04 &15.1.1,等標準。
詳情介紹:
PTL轉盤防水測試儀 進口轉盤試驗儀
產品名稱:PTL轉盤防水測試儀
產品品牌:德國PTL
產品用途:PTL轉盤防水測試儀用于轉動樣本來確定防水
參照標準:
IEC 60335-1 / 1991-04 &15.1.1,
IEC 60529 / 1989-11 &14.1 Table VIII Fig. 4,
IEC 60598-1 / 1996-11 ?9.2.4 and & 9.2.5 Fig. 7, IEC 60947-1 / 1988 &C.8 Fig. C.4,
EN 60529 / 1991 & 14.1 Table VIII Fig. 4,
DIN 40 050 Part 9 / 1993-05 & 7.4 Table 8 Fig. 4, VDE 0470 Part 1 / 1992-11 &14.1 Table 8 Fig. 4
Standard Outfit:
1 tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above floor approx. 220 mm,
1 frame with AC geared motor, with additional gear reduction to 1 + 0,1 rpm, with 4 height adjustable caster wheels, 2 of them lockable.
Design: tabletop with apron of aluminum, frame of steel hot-dip galvanized and papyrus white structure varnished, for connection to 230 V 50 Hz (other voltages on request), including a 3 m long hard wearing connection cable with waterproof CEE-plug,
table carrying Article
diameter: capacity: No.:
730 mm 150 kg P 17.37
850 mm 150 kg P 17.38
1050 mm 150 kg P 17.39
Additional Outfit:
PTL Swivel Accessory Unit
to change over from rotatory operation to swiveling operation with reverse of direction after approx. 350? absolutely necessary for specimens with connected cable, Article No.: P 17.44
Attachment :
PTL Telescope Support
for fitting on a turntable, to hold the specimens
Standard Outfit :
1 tubular stand, with mounting flange,
2 telescopic tubes, to clamp by tommy screws,
1 support grid, 270 mm x 180 mm, ±30 ° inclinable, to clamp by a tommy screw.
Design: all parts of stainless steel (material 1.4301 or 1.4305), screws of stainless steel, height of support grid above tabletop adjustable - unless otherwise agreed upon - from approx. 600 mm to 1200 mm, carrying capacity maximally 50 kg,
Article No.: P 17.47
PTL Turntable with Telescope Support, to be adapted between eccentricity 100 mm and inclination of the support grid by 15 ° in 4 directions, for 2,5 min each, turned by 90 °each, including automatic control, according to e. g. EN 60529 / 1991 &14.2.2 Fig. 3:on request