產品目錄
- 德國Lampert
- BND自研
- 德國FEMTO放大器
- 德國GTE
- Pacific Lasertec...
- 數據采集AA LAB SYSTE...
- 流量測量AA LAB SYSTE...
- 光纖鏈路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博納德試驗指針銷
- 插頭插座類檢測設備
- 燈頭燈座類檢測設備
- 標準地板防滑系列
- 進口手持型測力計
- 意大利Gabbrielli
- 英國MUNRO風速風向表
- 美國DL放大器
- 陶瓷扭轉粘度計
- 高壓電源放大器
- DEI脈沖發生器
- 瑞士Zurich Instrum...
- 冷凍負載試驗包
- 博納德試驗機設備
- 體育檢測儀器
- 美國ED&D試驗指
- 德國PTL試驗機設備
- 德國PTL試驗指針銷
- 光纖光譜儀
- 微型稱重傳感器
- 光學斬波器
- 高集數據采集卡
- 美國SRS放大器
- 德國WAZAU系列
- MONROE靜電測試儀
- 其他
產品詳情
簡單介紹：
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
IP3X Test Probe C ( Test Probe C) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances.
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
詳情介紹：
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
IEC61032 IP3X Test Probe C (Test Probe C)
Article NO.:BND-C
Basic Introduction:
1, According to: IEC61032:1997/IEC60529:2001 AND UL
2, IP3X Test Probe C ( Test Probe C) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances.
Technical parameters
1, Test Probe Length :100mm
2, Test Probe Diameter:2.5mm
3, Dam- sphere Diameter:35mm
4, Handle Diameter:10mm
5, Handle Length 100mm
6, According to IEC61032 figure 3 (the Test probe C), table 6
Application:
1, Standard test refers to the joint part can't touch the live parts or close to the dangerous parts, and 35mm circular baffle can not be enter .
2, In the test requirement for preventing access to the hazardous parts, Test Probe C/D need to be with push force 3±0.3N or 1±0.1N
Purpose:
This probe is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access with a tool.
Note:For the without force products,please use with the dynamometer.
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
IEC61032 IP3X Test Probe C試驗指針銷廠家供應
